Pioneer VSX-27TX - Manual (Page 48)

48
1
Turn on your TV and the receiver.
Make sure your TV is set to the appropriate video input (e.g.
VIDEO 1).
2
Press REMOTE SETUP.
The REMOTE SET UP menu appears on your TV screen.
You have four set up options:
1 PRESET RECALL
2 LEARNING
3 MULTI OPERATION (See p.63)
4 DIRECT FUNCTION (See p.65)
PRESET RECALL and LEARNING are the two modes that teach
the remote control to operate your other components. It's
easiest to start with PRESET RECALL and, if set up isn't possible
for certain components, move on to the LEARNING mode.
3
Press REMOTE SETUP and 1 at the same time to
select the PRESET RECALL SETUP mode.
All the MULTI CONTROL buttons (except the TUNER button)
start to blink.
To cancel the PRESET RECALL SETUP mode
Press REMOTE SET UP.
Remote Control of Other components
Setting Up the Remote Control to Control Other Components
In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV, LD,
CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and buttons, you
only need to use one remote control. If your component(s) are listed in the remote control's memory, simply follow the
steps below. If your component(s) are not listed, or if you want the remote to learn additional operations, you can use
the learning mode to input the information from the remote controls supplied with your other components.
Recalling preset codes
The following steps show you how to recall preset codes stored in the remote control. Once a preset code is recalled
and the component assigned, you can use this remote to easily operate the component.
See “Preset Code List“ on p. 75 for the components and manufacturers available.
memo
Select Remote
Setup Mode
Remote SETUP+1
Preset Recall
Remote SETUP+2
Learning
Remote SETUP+3
Multi-Operation
Remote SETUP+4
Direct Function
2,3
3
1 S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL