Pioneer VSX-27TX - Manual (Page 44)

44
Using the Tuner
Automatic and Manual Tuning
The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual
(step) tuning functions. If you already know the exact frequency of the station you desire, see “Direct Access Tuning“
on the following page.
1
Press the TUNER button.
On the remote, this selects the TUNER function on the
receiver and sets the remote to the TUNER operation mode.
2
Press BAND button on the remote or the FM/AM
button on the front panel to select the band (FM
or AM).
Each press switches the band: FM j AM
3
Tune in the station.
For Automatic Tuning
Press and hold TUNING –/+ for about one second, then
release.
The tuner starts searching the selected band and stop
automatically at the first station it locates. Repeat to locate
other stations.
For Manual Tuning
• To change frequencies one step at a time, press TUNING –/
+ repeatedly.
• To change frequencies quickly, hold down TUNING –/+ and
release when you reach the frequency you desire.
4
Adjust the volume.
MPX Mode
If the TUNED or STEREO indicators do not light when tuning an
FM station, because the station is too far away or the broadcast
signal is weak, press MPX on the remote control or front panel
to
switch to MONO reception. This should improve reception enough
for you to enjoy the broadcast.
dB
STEREO SIGNAL
SELECT
ANALOG SP
A
FM
VOLUME
dB
STEREO SIGNAL
SELECT
ANALOG SP
A
VOLUME
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO DSP
THX
/dts
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
DTV ON/OFF DTV MENU
TUNING
EXIT
DISC
GUIDE
+10
TV CONTROL
FUNCTION
ADVANCED
MIDNIGHT
STANDARD
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
REMOTE
SETUP
DIGITAL NR
EFFECT
/CH SEL
SYSTEM
SETUP
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0 ENTER
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
1
2
4
MPX
3
1 2
4 MPX
3
VSX-27TX