Pioneer DVR-660H-S - Manual (Page 106)

The Video Adjust menu 15
106
En
Chapter 15
The Video Adjust menu
Using the Video Adjust menu you can set up
the picture quality for the built-in tuner and
external inputs, for disc playback, and for
recording.
Setting the picture quality
for TV and external inputs
Picture Creation lets you choose a set of
picture quality settings for the built-in TV
tuner and for each external input. There are
several preset settings that suit various
sources, or you can create up to three of your
own sets.
Important
• Unless otherwise stated, the OSDs shown
in this manual are for the Taiwan and
Philippines model.
Choosing a preset
1 With the recorder stopped, press
to display the Home Menu.
2 Select ‘Setup’ > ‘Video Adjust’.
3 Select a preset.
• Use the INPUT SELECT button to switch
between the built-in TV tuner and the
external inputs.
• Use the CHANNEL +/– buttons to
change the channel of the built-in TV
tuner.
There are six presets available:
• Tuner – suitable for general TV
broadcasts
• VCR – suitable for video cassettes
• DTV/LDP – suitable for digital
broadcasts and Laserdiscs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual
settings for the current preset (Tuner, VCR
or DTV/LDP).
Creating your own set
There are three user presets in which you
can save your own set of picture quality
settings.
1 Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
2 Select ‘Detailed Settings’.
3 Select the setting you want to
adjust.
You can adjust the following settings:
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
HOME
MENU
ENTER
ENTER
Detailed Settings
2ch
Tuner
ENTER
Detailed Settings
2ch
Memory1
ENTER
Memory1
3-D Y/C
Motion Still
PureCinma
Prog. Motion
Auto
Motion Still
2ch
Detail
CNR
YNR
White AGC On
Max
Off
Off
Max
Max Off
16 Video_Adjust.fm 106 ページ ２００８年２月２０日 水曜日 午前１１時５５分