Pioneer DVR-660H-S - Manual (Page 118)

The Initial Setup menu 16
118
En
HDMI Control On • Enables the HDMI Control function. Select this option when
connected to an HDMI Control-compatible Pioneer Flat
Screen TV or AV system (amplifier or AV receiver etc.).
Off Disables the HDMI Control function. Select this option when
not connected to an HDMI Control-compatible component,
or when connected to a component manufactured by a
company other than Pioneer.
• The KURO LINK function name used on the web and in catalogues is referred to as HDMI Control in the operating
instructions and on the product.
• For more information about HDMI Control, see HDMI Control on page 21.
• This setting is available even if you are not connected to an HDMI device.
• For more information, see Troubleshooting on page 129.
Options
On Screen
Display On • The recorder displays operation displays (Stop, Play, etc.)
on-screen.
Off Switches off the on-screen operation displays.
Front Panel
Display On • The time is shown in the front panel display when the
recorder is in standby.
Off The front panel display is switched off in standby.
Remote Control
Mode Recorder 1–3
(default:
Recorder 1) If you are using more than one recorder in the same room,
set them to different IDs. This setting sets the recorder ID; to
change the remote controller ID, press and hold RETURN
then press 1, 2 or 3 to set. The remote will only control a
recorder with the same ID.
DivX VOD Registration
Code Use to display the recorder’s DivX registration code. See DivX
video compatibility on page 10 and DivX® VOD content on
page 11.
Set Preview
(HDD only) Quick
Preview • When in the Disc Navigator, the thumbnail video plays short
excerpts from throughout the selected title. (Note that edited
titles that will play normally from the beginning.)
Normal The thumbnail video plays from the beginning of the title.
Options 2
USB Restart USB
Device If the connected USB device does not respond to the
recorder, try using this option to restart it. If the device still
does not work properly try switching it off then back on, and/
or disconnecting then reconnecting the USB cable.
Confirm
Printer Use this option to confirm the maker and model of the printer
connected to the recorder (does not work with all printers).
Setting Options Explanation
DVR660HS_TLT_EN.book 118 ページ ２００８年２月２０日 水曜日 午前１１時３３分