Pioneer DVR-660H-S - Manual (Page 35)

Recording
35
En
05
Copying of copyrighted material such as
films or music is unlawful unless permitted
by a legal exception or consented to by the
rightowners.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Using the built-in TV tuner
There are three different ways to select TV
channels. Note that you can’t change the TV
channel during playback, recording or
during recording standby.
• CHANNEL +/– buttons
• Number buttons
For example, to select channel 4, press 4
then ENTER; for channel 34, press 3, 4,
ENTER.
1
• CH +/– buttons on the front panel
Changing audio channels
Taiwan and Philippines model:
Some TV programmes are broadcast with
both a main and a Secondary Audio
Programme (SAP). You can change the TV
audio using the AUDIO button.
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If SAP is selected, but there is no SAP
channel being broadcast, you will still
hear the main audio channel.
• If the sound is poor quality when set to
Stereo, you can often improve it by
changing to Mono.
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the LPCM
setting, only one channel of a dual mono
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Dual Mono Recording setting (see Dual
Mono Recording on page 111).
Other:
You can change the audio channel of the
broadcast or external input signal.
• Press to change the audio type.
The current audio channel is displayed
on-screen.
• If the NICAM audio setting (see NICAM
Select on page 111) is set to NICAM and
you are watching a NICAM broadcast,
you can switch between NICAM and
Regular (non-NICAM) audio.
Note
1 • Taiwan and Philippines model: Antenna channels are numbered 2 to 69. Cable channels are numbered 1 to
125.
• Other: Channel presets are numbered 1 to 99.
CHANNEL
AUDIO
Mono SAP
Stereo
AUDIO
NICAM
Regular
DVR660HS_TLT_EN.book 35 ページ ２００８年２月２０日 水曜日 午前１１時３３分