Initializing recordable dvd discs, Recording – Pioneer DVR-660H-S User Manual

Page 47

Advertising
background image

Recording

47

En

05

edited on this recorder even after
finalizing.

• DVD-R DL (Video mode) discs and

DVD+R DL discs must be finalized in
order to play in other recorders/players.
Note however that some recorders/
players will not play even finalized dual-
layer discs.

1

Load the disc you want to finalize.

Make sure that the recorder is stopped
before proceeding.

2

Display the Home Menu.

3

Select ‘Setup’ > ‘Disc Setup’.

4

Select ‘Finalize’ > ‘Finalize’ >

‘Next Screen’.

5

For DVD-R/-RW (Video mode)

and DVD+R/+RW discs only, select a title
menu style, then select ‘Yes’ to start
finalization or ‘No’ to cancel.
The menu you select will be the one that
appears when the ‘top menu’ (or ‘menu’ for
a DVD+R/+RW) is selected on any DVD
player.

• Discs recorded partially or fully on the

Pioneer DVR-7000 DVD recorder do not
support this feature. These discs will
have only a text title menu when finalized
on this recorder.

6

The recorder will now start finalizing

the disc.
During finalization:

• If the finalization process of a DVD-R/

-RW disc is going to take more than
around four minutes, you can press
ENTER to cancel. Around four minutes
before completion, the option to cancel
disappears.

• You can’t cancel the finalization of a

DVD+R/+RW disc.

• How long finalization takes depends on

the type of disc, how much is recorded
on the disc and the number of titles on
the disc. A disc recorded in VR mode can
take up to one hour to finalize. DVD-R/
-RW (Video mode) and DVD+R/+RW
discs can take up to 20 minutes.

Initializing recordable DVD
discs

DVD-R/-RW discs can be initialized for either
Video mode recording or VR mode
recording.

1

When you first load a blank DVD-RW or
DVD+RW disc, the recorder initializes it for
recording automatically. By default, blank
DVD-RW discs are initialized for VR mode
recording. See DVD-RW Auto Initialize on
page 48 if you want to change the default to
Video mode.

DVD-R discs are ready for Video mode
recordings out of the box; if you want to use
a DVD-R for VR mode recording, you must
initialize it before recording anything on the
disc.

HOME

MENU

ENTER

ENTER

Basic

Initialize

Finalize

Optimize HDD

Disc Setup

Finalize

Undo Finalize

Next Screen

Start

Finalize

ENTER

Finalize

Note

1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize it

for Video mode recording.

DVD-R DVD-RW DVD+RW DVD-RAM

DVR660HS_TLT_EN.book 47 ページ 2008年2月20日 水曜日 午前11時33分

Advertising
This manual is related to the following products: