Pioneer DVR-660H-S - Manual (Page 112)

The Initial Setup menu 16
112
En
Bilingual
Recording
(Other) A/L • Record the left (A) channel of a bilingual source when
recording to HDD with HDD Recording Format set to Video
Mode On, to DVD-R/-RW (Video mode) or DVD+R/+RW or in
LPCM mode, from an external source.
B/R As above, but for right (B) channel recording.
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you
want on playback.
DV Input Stereo 1 • Select to use the ‘live’ audio track (recorded during the video
shoot) from a camcorder that supports two stereo audio
tracks.
Stereo 2 Select to use the overdubbed audio track from a camcorder
that supports two stereo audio tracks.
Mix Select one of the three settings to use a mix of the two stereo
audio tracks.
Audio Out
Dolby Digital
Out Dolby
Digital • Output a Dolby Digital signal when a Dolby Digital source is
being played.
Dolby Digital
 PCM Convert Dolby Digital sources to Linear PCM output. Use if
your connected equipment doesn’t have a Dolby Digital
decoder.
DTS Out On • Output a DTS signal when a DTS source is being played.
Off Switch off the digital output when a DTS source is being
played. Use when your connected equipment doesn’t have a
DTS decoder. In this case, use the analog audio outputs.
96 kHz PCM Out 96 kHz

48 kHz •
Convert 96 kHz digital audio sources to 48 kHz output. Use if
your connected equipment doesn’t support 96 kHz sampling
rate.
96 kHz Output 96 kHz digital audio when a 96 kHz source is being
played.
MPEG Out MPEG Output an MPEG audio signal when a source using MPEG
audio is being played.
MPEG 
PCM •
Convert sources with MPEG audio to Linear PCM output. Use
if your connected equipment doesn’t have an MPEG audio
decoder.
Audio DRC On Switches on Audio DRC (Dynamic Range Control). Use when
listening to Dolby Digital material at low volume.
Off • Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby
Digital.
Setting Options Explanation
DVR660HS_TLT_EN.book 112 ページ ２００８年２月２０日 水曜日 午前１１時３３分