Paradyne 8310 MVLt - Manual (Page 18)

Hotwire DSLAM System Description
1-8 8000-A2-GB26-10 January 1999
Troubleshooting and Diagnostics
The Hotwire DSLAM system provides DSL diagnostic submenu options that:
H Display self-test results for CPU health, memory and ports, and resets.
H
Show major alarms such as Selftest Failure, Processor Failure, and DSL or
Ethernet port failure.
H Show minor alarms such as Configuration Error or Incorrect SN ports.
H
Run a nondisruptive packet echo test over the DSL line.
NOTE:
You must have Administrator permission to perform most of the
troubleshooting and diagnostic activities. However, you can run nondisruptive
tests as a user with Operator permission.
For more information about troubleshooting and diagnostics, see Chapter 6,
Diagnostics and Troubleshooting .
NOTE:
If you would like more information on DSL-based services, applications, and
network deployment, refer to Paradyne’s
DSL Sourcebook. The book may be
downloaded or ordered through Paradyne’s World Wide Web Site at
http://www.paradyne.com.