Paradyne 8310 MVLt - Manual (Page 77)

Monitoring the Hotwire DSLAM
5-21 8000-A2-GB26-10 January 1999
DSL SN Information Screen
Use the SN Information screen to display read-only Service Node information.
"
Procedure
1. Follow this menu selection sequence:
Monitoring
→
SN Information (B-F)
2. The SN menu appears. The information displayed on this screen is shown in
Table 5-6.
Table 5-6. Service Node Options
SN Information B-F
Displays Service Node information.
Port # – Enter the DSL or MVL port number (1–4).
SN Type – Model number of endpoint. For Model 8510, the SN is 5620. For
Model 8310, the SN is 6310 MVL modem.
System Name – 16 alphanumeric characters. Name assigned to the endpoint.
System Contact – 32 alphanumeric characters. Name or number of the person
responsible for the endpoint.
System Location – 16 alphanumeric characters. Physical location of the system.
Model Num – Model number of the endpoint.
Serial Num – Serial number of the endpoint.
Firmware Rev – Version of firmware.
Hardware Rev – Version of hardware.
CAP Rev – (For Model 8510 only) Version of CAP chipset.
MVL Rev – (For Model 8310 only) Version of MVL chipset.