Paradyne 8310 MVLt - Manual (Page 30)

Hotwire Menus and Screens
2-12 8000-A2-GB26-10 January 1999
For more information about the status displayed on this screen, such as major
and minor alarms, see
Troubleshooting in Chapter 6, Diagnostics and
Troubleshooting.
Accessing the Hotwire – DSL Menu
"
Procedure
To access the Hotwire – DSL menu:
1. From the Hotwire Chassis Main Menu, select Card Selection.
The Card Selection screen appears.
2. Verify that the DSL card you want to access appears on the Card Selection
screen. (See Card Selection Screen on page 2-10 for more information.)
3. At the Goto Card (MCC or DSLnn): prompt, enter the number of the
slot. Then, press Enter. For example, if you want to configure the DSL card in
Slot 13, type 13.
The Hotwire – DSL menu appears.
Exiting from the System
You can manually log out of the system or, after five minutes of inactivity, the
system will automatically log you out.
Manually Logging Out
"
Procedure
To exit from the Hotwire DSLAM system:
1. Return to the Card Selection screen by selecting Exit from either the
Hotwire – MCC menu or the Hotwire – DSL menu.
2. Press Ctrl-z.
3. From the Hotwire Chassis Main Menu, select Logout.
The system exits from the current login session on the Hotwire DSLAM.
Automatically Logging Out
The DSLAM system has an automatic timeout feature that logs you out of the
system after five minutes of inactivity. You will need to log back in to continue
your work.
To log back in, press Enter to display the User Login screen and log in.