Paradyne 8310 MVLt User Manual
Page 58
Monitoring the Hotwire DSLAM
5-2
8000-A2-GB26-10
January 1999
"
Procedure
To view general card information, login history, and the system log:
1. Follow this menu selection sequence:
Monitoring
→
Card Status (B-A)
2. The Card Status menu appears. Select the submenu option as shown in
Table 5-1 and press Enter.
Table 5-1.
Card Status Options
Card Info (General Card Information)
B-A-A
Displays card information.
Card Name – Name assigned to the card.
Card Location – Physical location of the system.
Card Contact – Name or number of the person responsible for the card.
Card Up Time – Length of time the card has been running.
Available Buffers – Number of Buffers not in use.
Buffer Ram Size – Size of the Buffer Ram.
Fast Data Ram Size – Total and Available Fast Data Ram.
Card Type – Type of Card (MCC, DSL).
Model Num – Model number of card.
Serial Num – Serial number of card.
Firmware – Version of firmware.
CAP Firmware – Version CAP chipset for Model 8510 RADSL card only.
MVL Rev – Version of MVL chipset for Model 8310 MVL card only.
Hardware Rev – Version of hardware.
Login History
B-A-B
Displays a list of information on the 10 most recent logins.
User – User ID.
Time – Date and time of the most recent login.
Local/Remote – Local or Remote Connection.
Number of unsuccessful Console logins – Number of console logins that were
incorrect in the last 10 attempts.
Number of unsuccessful Telnet logins – Number of Telnet logins that were incorrect
in the last 10 attempts.
Syslog (System Log)
B-A-C
Displays a time stamped sequential list of operational type errors by date and error.
There is one logged error per line in a downward scrolling list. The list has a 17-error
entry maximum. When the log is full, the oldest entry is deleted. Refer to the