Phase One H 5 - Manual (Page 16)

Apply to Image
When selected, the chosen gray balance will be applied to the current
image and all subsequent images, until a new gray balance is set.
Current Capture
This only changes the gray balance of the current capture. All subsequent
captures retain the gray balance set under Apply to Image.
All Selected Captures
Include a gray card in the first shot, and apply the gray balance setting
to all other selected images.
To use the „All Selected Captures“ option, first open the image with the step
wedge in the Preview Window. Then return to the Capture Collection and
select all the other images to be balanced. Now return to the Preview
Window and select “Gray Balance” from the “Camera” menu.
Finally click on the step wedge and choose “All Selected Captures”
from the pop-up menu.
4.6
Editing and Selecting Images
4.7
Editing and Selecting Images
Simply follow these steps:
1) Open the image to be
corrected in the Preview
Window.
2) Choose “Gray Balance”
from the Camera menu.
3) Click the pointer on an area,
which must be neutral gray in
the final image. If the image
contains no white or gray,
repeat the shot and include
something such as the Kodak
Q14 Step Wedge.
Select the step with an RGB
value of between 200 and
225, this will yield a well-balanced image.
4) Click “Apply”. The gray balance will now be applied to all
consecutive images.
Other gray balancing options available to ensure flexibility and to
improve workflow. They are :