Phase One H 5 - Manual (Page 40)

All developed capture files are stored in a sub folder called Develops
(C:\Program Files\Capture One Basic\Scuba\Develops), which is
automatically created by checking the box Develop capture in the
Session Creator dialogue box.
The capture folder thus created is automatically set as the current capture
folder and capture files are named according to the session name — in
this case “Scuba”. The name can be altered at any time during shooting.
Files can also be named and numbered automatically. The Capture
naming tab is located under the File/Preferences. Enter a name in the
“Session” field of the Capture Collection window. All subsequent captures
will now be named accordingly. To automatically add a number to each
capture, open the Capture Naming Preferences window and enter a
number in the “Delimiter” field. There is a maximum of six digits. Check
the box next to “Always include number” and a sample of the naming
and numbering will appear.
Image names can be altered at all times by clicking on the capture
name field at the bottom of each preview.
Naming Sessions
The Session Creator is a feature that enables you to name the capture
folder, and associate this capture folder with a dedicated develop folder,
in one simple operation.
12.2
Software Set-up Software Set-up
12.3