Phase One H 5 - Manual (Page 37)

11 Install the Software
After the computer is restarted, the software that will control the IEEE
1394 card must be installed, as well as the software for the Phase One
H 5. We have included one easy-to-use installer that will place all of the
necessary software on the computer.
Follow these steps to install the software.
1) Place the included CD-ROM into the CD drive. Double-click the
CD-ROM icon.
2) Double-click the item marked “CaptureOne Inst.exe”.
3) Read the software license, and, if in agreement, click the “Agree”
button to continue with the installation. Otherwise, click “Cancel” to
quit the installation.
4) When prompted for the Adobe® Photoshop® “Plug-Ins” folder, choose
the correct folder from the list. Be sure to choose the Photoshop folder, as
there may be many different plug-in folders on the hard disk.
If installation is made on a non-english PC, the installer may not be able
to locate the Photoshop® plug-ins folder, so be sure to select the proper
plug-in location.
5) Follow the on-screen prompts. When the installation is completed,
restart the computer.
Once restarted, plug the camera back into the IEEE1394 port. The driver
for the Phase One H 5 is automatically copied into the Windows driver
directory during installation and this should ensure that the Driver Wizard
does not appear when the camera back is connected for the first time.
If Windows does detect new hardware (the camera back) and asks for
a driver, then click on the “Browse” button and direct the Driver Wizard
to the “c:/CaptureOne/” directory for the correct driver file.
Install the Software
11.1