Phase One H 5 - Manual (Page 33)

10 Windows Getting Started
The Phase One H 5 has been designed for ease of installation and use.
There are just a few easy steps to follow, from unpacking the Phase One
H 5 to developing the first shot.
- Connect hardware, install software
- Launch the Capture One application
- Determine the exposure and shoot
- Select images to develop from the Capture Collection
- Gray Balance
- Crop desired image
- Adjust Gradation Curve/Tonal Range
- Set any desired Color Management, naming, etc.
- Click Develop
The following sections have all of the basic information you need for
getting started, step by step.
Hardware Set-up
The camera back connects to the computer via an IEEE 1394 connection.
This new, extremely fast connection does not have many of the limitations
of the SCSI technology used in previous digital cameras. Many of the
problems related to SCSI such as setting ID numbers, termination, and
not being able to “hot-plug” (having to shut down before unplugging the
device) are nonexistent with 1394. The cable length can be extended
using the Phase One Power Conditioners to move the camera far from
the computer.
10.1
Windows Getting Started