Phase One H 5 - Manual (Page 60)

Using advanced mode on textiles
On textile the optimal settings for the advanced filter would be to position
the Quality/Speed slider towards Speed, or in an intermediate position.
Then move the Pattern Size slider to the smallest possible setting. In many
cases the masking of unicolored, or nearly unicolored areas, may be
carried out less accurately with the advanced filter compared to the
Unicolor textiles filter. Since masking depends very much on the type of
image, it is recommended to test different masking and filter settings.
Quality/Speed
When large areas of moiré stripes and bands are present the Quality/
Speed slider should be set towards Quality, at the cost of Speed.
Use the Quality setting when details smaller that the selected pattern size
should be less affected by the filtering.
Using advanced mode on skin and hair
For skin and hair surfaces the optimal settings for the advanced filter
would be to position the Quality/Speed slider at Speed and the Pattern
Size slider very close to Small. Please note that large color moiré areas
in hair may require a larger pattern size setting.
16.2
Additional Features Additional Features
16.3