Accessing network information, Dns/wins setup, Accessing network information dns/wins setup – Pelco DX8100 User Manual
Page 37: 33 ip configuration status box
C2629M-A (6/07)
37
ACCESSING NETWORK INFORMATION
Changes in network settings may not show up immediately in the IP Configuration status box. Allow up to 30 minutes for settings to update or
reboot your DVR for settings to change immediately.
To access network information such as IP and default gateway addresses:
1. Click Network Information. The IP Configuration status box is displayed.
Figure 33. IP Configuration Status Box
2. Click OK to return to the Network page.
DNS/WINS SETUP
If your network supports DNS or WINS services, follow the instructions below:
1. Click the DNS/WINS tab.
2. Do one of the following:
a.
If you are using dynamic IP addressing through a DHCP server, click the “Obtain DNS/WINS info from DHCP” check box.
or
b.
If you are using static IP addressing, provide the following information in the appropriate fields. This information can be obtained from
your network administrator.
•
Primary DNS server IP address.
•
Secondary DNS server IP address.
•
Primary WINS server IP address.
•
Secondary WINS server IP address.