Printer software setup, Setting up a local plug-and-play printer, 69 printer setup window (plug-and-play) – Pelco DX8100 User Manual
Page 57
C2629M-A (6/07)
57
PRINTER SOFTWARE SETUP
This section describes how to set up printer software.
WARNING: Do not install any software that may have come with your printer on the DX8100. The DX8100’s operating system includes
built-in services designed to communicate with printers that exhibit the Designed for Microsoft Windows XP logo.
SETTING UP A LOCAL PLUG-AND-PLAY PRINTER
1. Make sure your printer is properly connected according to the instructions in the previous section.
2. Start the DX8100.
3. Wait while the system detects your printer and the Windows Add Printer Wizard begins.
4. The DX8100 client starts.
5. Log in to the DX8100 as an Administrator level user.
6. Exit the DX8100 application and return to the Windows operating system. For more information, refer to Exiting to Windows Operating
7. Click Start > Settings > Printers. The Printer Setup window opens. Double-click Add Printer.
Figure 69. Printer Setup Window (Plug-and-Play)