Pelco DX8100 - Manual (Page 38)

38 C2629M-A (6/07)
3. Click Apply to update the configuration.
Figure 34. DNS/WINS Setup
RS-422/RS-485 COMMUNICATION PORT SOFTWARE CONFIGURATION
The system must be powered on, and you must be logged in as a Power User or Administrator to configure communication port settings.
To configure the RS-422/RS-485 ports in software:
1. Click .
2. Click .
3. Click the Port/Device tab. The Port/Device page is displayed.
Figure 35. RS-422/RS-485 Port Setup Page
4. From the drop-down box, select Port 1–4. None is the default setting in the selected device drop-down box. In this case, the port settings
drop-down boxes are not available.
5. In the selected device drop-down box, select a device. The port settings drop-down boxes are available.