Pelco DX8100 - Manual (Page 80)

80 C2629M-A (6/07)
SETTING UP A RS-232 ATM/POS DEVICE CONFIGURATION
This section describes how to set up a RS-232 ATM/POS device configuration. You use the RS-232 ATM/POS device configuration to record
searchable ATM/POS data that is synchronized with recorded video. In this configuration, the camera is connected directly to the DX8100 camera
input. The ATM/POS data is routed through the VSI-PRO to the DX8100 RS-232 communications port. ATM/POS output is recorded by the
DX8100 as data. Once recorded, the ATM/POS data is searchable and can be displayed synchronously with the recorded transaction video.
Figure 104 illustrates a RS-232 ATM/POS device configuration. One or two ATM/POS devices can be connected to the DX8100. One camera is
shown, but multiple cameras can be assigned to monitor the ATM/POS event from different physical positions. For specific details about the
DX8100 back panel, refer to Figure 11 on page 23.
ᕢ ᕤ
ᕡ
ᕣ
ᕥ
ᕦ
Figure 103. RS-232 ATM/POS Device Configuration
The table below describes the items required for the RS-232 ATM/POS device configuration.
Table J. Items Required for a Single RS-232 ATM/POS Device Configuration
Item Part Description
Camera The designated camera positioned to monitor the ATM/POS event. One or more cameras can be configured
to respond to an ATM/POS event.
Video cable A user-supplied cable that connects the camera to the DX8100 video input.
VSI-PRO AVE VSI-PRO ATM/POS interface.
AVE triport cable used to connect the ATM/POS device to the VSI-PRO and to connect the VSI-PRO to the
DX8100 RS-232 COM1 or COM2 port.
The DX8100 DVR.
The ATM/POS device.
Figure 105 illustrates a dual ATM/POS device configuration.
ᕢ
ᕡ ᕡ
ᕢ ᕣ ᕣ
ᕤ ᕤ
ᕥ ᕥ
ᕦ
Figure 104. RS-422 ATM/POS Device Configuration
Data cable
DX8100 server
ATM/POS device