Pelco DX8100 - Manual (Page 43)

C2629M-A (6/07) 43
ENABLING IPSEC SECURITY SERVICES
In order to communicate with a networked DX8100 Series DVR, IPSec security must be enabled on your computer. To see the Manage IPSec
Settings menu option from the Start menu, the Start menu has to be changed to the Classic View.
To enable IPSec security services:
1. Do one of the following:
• Verify that the Start menu is in the Classic View.
• Set the Start menu to the Classic View.
2. Go to Start > Manage IPSec Settings. The DX8100 IPSec Policy dialog box opens.
Figure 43. Enabling IPSec Security for the PC Client Application
3. Select the Enable DX8100 IPSec Policy check box if it is not already selected.
4. (If applicable) Set the Start menu to its previous view.
DISABLING IPSEC SECURITY SERVICES
Disabling IPSec security services may hamper your PC’s ability to communicate with DX8100 servers. Consult your system administrator before
disabling IPSec security. For information about using the DX8100 Client application, refer to the DX8100 Client Applications manual.
To disable IPSec security services:
1. Do one of the following:
• Verify that the Start menu is in Classic View.
• Set the Start menu to Classic View.
2. Go to Start > Manage IPSec Settings. The DX8100 IPSec Policy dialog box opens.
Figure 44. Disabling IPSec Security for the PC Client Application
3. De-select the Enable DX8100 IPSec Policy check box.
4. (If applicable) Set the Start menu to its previous view.
INSTALLING THE CLIENT EMERGENCY AGENT APPLICATION
To install the Emergency Agent application:
1. Start the Windows operating system.
2. Close all programs, including any antivirus software.