Pelco DX8100 - Manual (Page 39)

C2629M-A (6/07) 39
6. Configure the port settings using the drop-down boxes provided. Refer to Table D. Refer to the instructions that came with your peripheral
device for correct settings.
Table D. RS-422/RS-485 Port Settings
Setting Options
Device None or multiple devices
Interface Mode RS-422 or RS-485
Baud Rate 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600, or 115200
Parity None, Odd, or Even
Data Bits 5, 6, 7, or 8 bits
Stop Bits 1 or 2 bits
7. Click Apply.
CLIENT SOFTWARE SETUP
This section describes how to install and setup DX8100 client software.
RECOMMENDED SYSTEM REQUIREMENTS
The following are the minimum recommended system requirements for the DX8100 PC client, web client, and Emergency Agent software
applications.
• Processor: Intel ® Pentium ® 4 with 2800 MHz minimum processor speed
• Memory: 256 MB of RAM
• Video: AGP VGA card with minimum of 64 MB video RAM, 1024 x 768 or 1280 x 1024 display resolution, 32-bit color, and DirectX ® 8.1 or
later hardware acceleration
• 500 MB of free disk space
• Monitor: SVGA or XGA with 1024 x 768 or 1280 x 1024 resolution, 32-bit color
• Operating System: Windows 2000 (SP4) or Windows XP Professional
• Microsoft Internet Explorer: Version 5.5 or later