Pioneer DVH-P5650MP - Manual (Page 29)

# If the remote control is set to DVH mode, o
and p are assigned to other functions. Use
m and n instead for the DVD mode functions
controlled by o and p.
4 To stop playback, press g.
# When you stop Video CD playback by pressing
g, that location on the disc is memorized en-
abling playback from that point when you play
the disc again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.
Specifying track
To perform this function, set the remote con-
trol to DVD mode.
! You cannot operate this function by using
NUMBER when the remote control is set to
DVH mode.
% Press NUMBER corresponding to a de-
sired track number during playback.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Notes
! With some discs, the icon may be dis-
played and operation may not be possible.
! With Video CD, direct search is not possible
during PBC playback.
Selecting a trackdirectly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
! To select 3, press 3.
! To select 10, press 1 and 0 in order.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Notes
! After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
! During playback of Video CDs featuring PBC
(playback control), this function cannot be op-
erated.
Pausing Video CD playback
Pause lets you temporarily stop disc playback.
% Press f during playback.
The icon e is displayed and playback is
paused, letting you view a still image.
# To resume playback at the same point that you
turned pause on, press f again.
Note
Depending on the disc and the playback location
on the disc, the icon
may be displayed, indicat-
ing that still playback is not possible.
Playing Video CDs
En
29
Section
07
Playing
V
ideo
CDs