Understanding auto ta and eq error, Messages 91, Under – Pioneer DVH-P5650MP User Manual

Page 91: Standing auto ta and eq error messages on, Understanding auto ta and eq error messages, Additional information

Advertising
background image

Message

Cause

Action (See)

TEMP

The temperature of this unit is out-

side the normal operating range

Wait until the units temperature returns to

within normal operating limits.

NON-PLAY

The disc does not have the same re-

gion number as this unit

Replace the DVD video with one bearing the

correct region number.

This type of disc cannot be played

by this unit

Replace the disc with one this unit can play.

The disc is loaded upside down

Check that the disc is loaded correctly.

ERROR-05

Electrical or mechanical

Turn the ignition ON and OFF, or switch to a

different source, then back to the DVD player.

PROTECT

All the files on the inserted disc are

secured by digital rights manage-

ment (DRM)

Replace disc.

SKIPPED

The inserted disc contains WMA

files that are protected by digital

rights management (DRM)

Replace disc.

Error messages on the display

Message

Cause

Action (See)

ERROR-02

Dirty disc

Clean disc.

Scratched disc

Check that the disc is loaded correctly.

THERMAL PROTECTION IN

MOTION

The temperature of this unit is out-

side the normal operating range

Wait until the units temperature returns to

within normal operating limits.

DIFFERENT REGION DISC

The disc does not have the same re-

gion number as this unit

Replace the DVD video with one bearing the

correct region number.

NON-PLAYABLE DISC

This type of disc cannot be played

by this unit

Replace the disc with one this unit can play.

The disc is loaded upside down

Check that the disc is loaded correctly.

Understanding auto TA and EQ error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto

TA and EQ, an error message may appear on the display. If an error message appears, refer to the

table below to see what the problem is and the suggested method of correcting the problem. After

checking, try again.

Message

Cause

Action

ERR MIC

Microphone is not connected.

Plug the supplied microphone securely into

the jack.

Additional Information

En

91

Appendix

Additional

Information

Advertising