Adjusting bass and treble 59, Adjusting bass and treble, Audio adjustments – Pioneer DVH-P5650MP User Manual

Page 59: Fine-adjusting equalizer curve, Adjusting bass and treble level, Selecting bass frequency

Advertising
background image

Fine-adjusting equalizer curve

You can adjust the center frequency and the Q

factor (curve characteristics) of each currently

selected curve band (EQ-L/EQ-M/EQ-H).

Level (dB)

Center frequency

Q=2N

Q=2W

Frequency (Hz)

1 Press A and hold until frequency and

the Q factor (e.g., F- 80:Q1W)appears in

the display.

2 Press A to select the band for adjust-

ment from among low, mid and high.

Press A repeatedly to switch between the fol-

lowing functions:

LowMidHighB (bass adjustment)T

(treble adjustment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to B
and T.

3 Press m or n to select the desired

frequency.

Press m or n until the desired frequency

appears in the display.

Low: 4080100160 (Hz)

Mid: 2005001k2k (Hz)

High: 3k8k10k12k (Hz)

4 Press r or q to select the desired Q

factor.

Press r or q until the desired Q factor ap-

pears in the display.

2N1N1W2W

Note

If you make adjustments, CUSTOM curve is up-
dated.

Adjusting bass and treble

You can adjust bass and treble settings.

! If EQ-EX function has been selected and

EQ-EX turned on and CUSTOM selected as

the equalizer curve, you can adjust bass

and treble settings.

! If SFEQ has been set to FRT1, bass adjust-

ment affects only the rear output: front out-

put cannot be adjusted.

! If SFEQ has been set to FRT1 or FRT2, tre-

ble adjustment affects only the front out-

put: rear output cannot be adjusted.

Adjusting bass and treble level

You can adjust the bass and treble level.

1 Press A to select B.

Press A until B appears in the display.

# If the treble level has been previously ad-
justed, T will be displayed.

2 Press m or n to select bass or treble.

Press m and B is displayed. Press n and T

is displayed.

3 Press r or q to adjust the level.

Each press of r or q increases or de-

creases the selected bass or treble level. +6 

6 is displayed as the level is increased or de-

creased.

Selecting bass frequency

You can select the bass frequency for level ad-

justment.

Audio Adjustments

En

59

Section

11

Audio

Adjustments

Advertising