Pioneer DVH-P5650MP - Manual (Page 84)

Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Press F to select DSC-A.
Press F repeatedly until DSC-A appears in the
display.
2 Press r to turn automatic playback
on.
DSC-A: ON appears in the display.
# Press q to turn automatic playback off.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HI to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P7650) is connected to this unit,
you can operate this function.
1 Press F to select D_ATT.
Press F repeatedly until D_ATT appears in the
display.
2 Press r or q to select LOW or HI.
Pressing r or q will switch between HI
(high) and LOW (low) and that status will be
displayed.
# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down F until the unit turns off.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P7650) is connected to this unit,
you can operate this function.
1 Press F to select A-RESET.
Press F repeatedly until A-RESET appears in
the display.
2 Press r to display RESET OK?.
RESET OK? appears in the display.
# To cancel resetting the audio functions, press
BAND/ESC.
3 Press n to display REALLY?.
REALLY? appears in the display.
# To cancel resetting the audio functions, press
BAND/ESC.
4 Press r to reset audio functions.
COMPLETE appears in the display.
Initial Settings
En
84
Section
14