Using the equalizer 58, Using the equalizer, Audio adjustments – Pioneer DVH-P5650MP User Manual

Page 58: Recalling equalizer curves, Adjusting equalizer curves

Advertising
background image

# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer
controller on page 83.

3 Press m or n to adjust left/right

speaker balance.

When you press m or n, BAL : 0 is dis-

played. Each press of m or n moves the

left/right speaker balance towards the left or

the right.

BAL : L9  BAL : R9 is displayed as the left/

right speaker balance moves from left to

right.

Using the equalizer

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

Recalling equalizer curves

There are six stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

POWERFUL Powerful

NATURAL

Natural

VOCAL

Vocal

CUSTOM

Custom

EQ FLAT

Flat

SPR-BASS

Super bass

! CUSTOM is an adjusted equalizer curve

that you create.

! A separate CUSTOM curve can be created

for each source. If you make adjustments,

the equalizer curve settings will be memor-

ized in CUSTOM.

! When EQ FLAT is selected no supplement

or correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

EQ FLAT and a set equalizer curve.

% Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol-

lowing equalizers:

POWERFULNATURALVOCALCUSTOM

EQ FLATSPR-BASS

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

1 Press A to select EQ.

Press A until EQ appears in the display.

2 Press m or n to select the equalizer

band to adjust.

Each press of m or n selects equalizer

bands in the following order:

EQ-L (low)EQ-M (mid)EQ-H (high)

3 Press r or q to adjust the level of

the equalizer band.

Each press of r or q increases or de-

creases the level of the equalization band.

+6  6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust
the level.

Note

If you make adjustments, CUSTOM curve is up-
dated.

Audio Adjustments

En

58

Section

11

Advertising