Panasonic KX-FC231NZ - Manual (Page 31)

4. Telephone
29
4 Telephone Making and Answering Calls
4.1 Making phone calls
4.1.1 With the handset
1 Lift the handset and press {C} or {s}.
2 Dial the telephone number.
3 When finished talking, press {ih} or place
the handset on the base unit.
Speakerphone operation
For best performance, please note the following:
–
Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, press {e} or {v}
repeatedly to adjust the speaker volume as
necessary.
To redial the last number dialled from the
handset
Press {C} or {s}, then press {R}.
To redial automatically
Press {s}, then press {R}.
L If the line is busy, the unit will automatically
redial the number up to 9 times. While the
handset is waiting to redial, {s} will flash.
While the handset is redialling, mute is
automatically turned ON.
Note:
L If mute does not turn OFF after the line is
connected, press {C/T}.
To make a call using the redial list
The last 10 telephone numbers dialled from the
handset are stored in the redial list.
1. Press {R}.
L The last number dialled will be displayed.
2. Press {e} or {v} repeatedly to select the
desired number.
L To exit the list, press {ih}.
3. Press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
To edit a number in the redial list before
calling it
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Edit and Call”, then press {>}.
4. Press {<} or {>} to move the cursor, then
edit the number.
L Place the cursor on the number you wish
to erase, then press {C/T}.
L Place the cursor to the right of where you
want to insert a number, then make the
correction.
5. Press {C} or {s}.
To erase numbers in the redial list
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Erase”, then press {>}.
L If you want to erase all numbers in the list,
select “
Erase All”, then press {>}.
4. Select “ Yes”, then press {>}.
5. Press {ih}.
To store a number from the redial list into
the handset phonebook
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Add Phonebook”, then press {>}.
4. Enter a name, up to 16 characters (see page
85 for character entry), then press {j/OK}.
5. Edit the phone number if necessary, then
press {j/OK}.
6. Select the desired category (page 32), then
press {>}.
7. Select “ Save”, then press {>}.
8. Press {ih}.
Voice enhancer
You can change the tone quality of the receiver
while you are on a call. 3 settings are available.
1. Press {j/OK} during a call.
{ih}
{ C/T}
{R}
{j /OK}
{C}
{s}
{<}{>}{e}{v}
FC235AL-PFQX2248ZA_en.book Page 29 Thursday, May 19, 2005 1:47 PM