Panasonic KX-FC231NZ - Manual (Page 96)

13. Help
94
13.3.6 Copying
The other party complains
that they cannot send a
document. L The receiving mode is set to TEL mode.
Receive the document manually (page 53) or change the receiving
mode to TAM/FAX mode (page 55) or FAX ONLY mode (page 56).
L The memory is full of received documents due to a lack of
recording paper, a lack of ink film or a recording paper jam. Install
paper (page 19) or clear the jammed paper (page 97).
I cannot select the desired
receiving mode. L If you want to set TAM/FAX or FAX ONLY mode, set the desired
mode using feature #77 (page 70), and press {AUTO ANSWER}
repeatedly to select the desired mode.
L If you want to set TEL mode, press {AUTO ANSWER} repeatedly
to select TEL mode.
L The Distinctive Ring is set (feature #31 on page 58).
I cannot receive
documents using the
handset. L The memory is full of received documents due to a lack of
recording paper, a lack of ink film or a recording paper jam. Install
paper (page 19) or clear the jammed paper (page 97).
When an extension
telephone is connected, I
cannot receive
documents by pressing
{*}{#}{
9}.
L You must set remote fax activation to ON (feature #41 on page 69)
beforehand.
L Press {*}{#}{9} firmly.
L The memory is full of received documents due to a lack of
recording paper, a lack of ink film or a recording paper jam. Install
paper (page 19) or clear the jammed paper (page 97).
Problem Cause & Solution
The unit will not make a
copy. L The ink film is empty. Replace the ink film with a new one (page
18).
L You cannot make a copy during programming.
L You cannot make a copy during a telephone conversation.
A black line, a white line or
smudge appears on the
copied document. L The scanner glass, white plate or rollers are dirty with correction
fluid, etc. Clean them (page 101). Please do not insert a document
before correction fluid has dried completely.
The copied image is
distorted. L Adjust the width of the document guides to fit the actual size of the
document.
The printing quality is
poor. Please do not reuse the ink film!
Please use genuine Panasonic replacement film. Refer to page 11 for
further details.
Original Copy
L Some paper has instructions recommending which side to print on.
Try turning the paper over.
L You may have used paper with a cotton and/or fibre content that is
over 20%, such as letterhead or resume paper.
L The thermal head is dirty. Clean it (page 102).
Problem Cause & Solution
A B C
FC235AL-PFQX2248ZA_en.book Page 94 Thursday, May 19, 2005 1:47 PM