Patton electronic 3088A - Manual (Page 24)

Introduction 24
Model 3088A Series User Manual 2 • Configuration
S4-2 through S4-8: Data Rate
Switches S4-2 through S4-8 define both the DSL line rate and the serial data rate.
Note For 3088A/K models, only columns S4-4 through S4-8 apply in this table.
Also, use S4-1 to configure the Line Build Out:
OFF = 75 ohms, ON = 120 ohms.
Table 5. S4-2 through S4-8 Data Rate DIP switch settings
S4-2 S4-3 S4-4 S4-5 S4-6 S4-7 S4-8 Data Rate (kbps)
OFF OFF OFF OFF OFF OFF ON 192
OFF OFF OFF OFF OFF ON OFF 256
OFF OFF OFF OFF OFF ON ON 320
OFF OFF OFF OFF ON OFF OFF 384
OFF OFF OFF OFF ON OFF ON 448
OFF OFF OFF OFF ON ON OFF 512
OFF OFF OFF OFF ON ON ON 576
OFF OFF OFF ON OFF OFF OFF 640
OFF OFF OFF ON OFF OFF ON 704
OFF OFF OFF ON OFF ON OFF 768
OFF OFF OFF ON OFF ON ON 832
OFF OFF OFF ON ON OFF OFF 896
OFF OFF OFF ON ON OFF ON 960
OFF OFF OFF ON ON ON OFF 1024
OFF OFF OFF ON ON ON ON 1088
OFF OFF ON OFF OFF OFF OFF 1152
OFF OFF ON OFF OFF OFF ON 1216
OFF OFF ON OFF OFF ON OFF 1280
OFF OFF ON OFF OFF ON ON 1344
OFF OFF ON OFF ON OFF OFF 1408
OFF OFF ON OFF ON OFF ON 1472
OFF OFF ON OFF ON ON OFF 1536
OFF OFF ON OFF ON ON ON 1600
OFF OFF ON ON OFF OFF OFF 1664
OFF OFF ON ON OFF OFF ON 1728
OFF OFF ON ON OFF ON OFF 1792
OFF OFF ON ON OFF ON ON 1856
OFF OFF ON ON ON OFF OFF 1920
OFF OFF ON ON ON OFF ON 1984
OFF OFF ON ON ON ON OFF 2048
OFF OFF ON ON ON ON ON 2112
OFF ON OFF OFF OFF OFF OFF 2176