Patton electronic 3088A - Manual (Page 50)

Introduction 50
Model 3088A Series User Manual 6 • Software Upgrade
Introduction
The software upgrade feature is available through BOOTP/TFTP. The software upgrade takes approximately
2-3 minutes to complete. To upgrade the software:
1. Connect to the Model 3088A via the Ethernet management port and a Telnet session.
2. Enter the system show info command to view the unit’s MAC address.
3. Configure a BOOTP/TFTP server and enter the system upgrade / yes command to begin the upgrade.
4. Alternatively, you may enter the system upgrade <TFTP server IP address>:/<filename> command to
begin the upgrade.
After approximately 2-3 minutes, the 3088A will operate with the upgraded software.