Patton electronic 3088A - Manual (Page 31)

Introduction 31
Model 3088A Series User Manual 2 • Configuration
Remote Console
Provided that there is a DSL link to a second 3088A, a user may login to the first 3088A’s console and enter
the remote console command to access the second 3088A’s console. Using this remote console feature, the user
can configure and query the status of the second 3088A from a remote location. When the user is finished with
the remote console, the logout command can be used to return to the local console.
Example Command Line Interface Session
3088A/K Command Shell
Password:
3088A> system show config
clocking
clock mode: receive-recover
dsl timeslots: 31
system
circuit id: Patton Model 3088A
interface
timeslot map: fffffffe
line type: e1-fractional
line coding: hdb3
line build out: 75ohm
rx equalizer: inactive
pass alarms: inactive
pass framing: inactive
g.shdsl
annex: b
mode: cpe
dsl test modes
loopback: off
pattern: off
3088A> dsl show status
configuration:
dsl mode: cpe
dsl timeslots: 31
annex: b
status:
actual rate: 0
loss of signal: signal found
noise margin: 0
sync state: out of sync
link state: idle
test modes:
loopback: off
pattern: off
errors: 0
error counters:
crc: 0
losw: 0
3088A> system set help
Usage: system set <options>