Planet Technology WGS3-404 User Manual

Page 106

Advertising
background image

WGS3 Layer 3 Switch User’s Manual

- 98 -

Parameter Description

Drop Events

The total number of events in which packets were dropped due to lack of resources.

Bytes

Total number of bytes of data received on the network. This statistic can be used as

a reasonable indication of Ethernet utilization.

Frames

The total number of frames (bad, broadcast and multicast) received.

Broadcast Frames The total number of good frames received that were directed to the broadcast

address. Note that this does not include multicast packets.

Multicast Frames The total number of good frames received that were directed to this multicast

address.

CRC/Alignment

Errors

The number of CRC/alignment errors (FCS or alignment errors).

Undersize Frames The total number of frames received that were less than 64 octets long (excluding

framing bits, but including FCS octets) and were otherwise well formed. Oversize

Frames The total number of frames received that were longer than 1518 octets

(excluding framing bits, but including FCS octets) and were otherwise well formed.

Fragments

The total number of frames received that were less than 64 octets in length

(excluding framing bits, but including FCS octets) and had either an FCS or

alignment error.

Jabbers

The total number of frames received that were longer than 1518 octets (excluding

framing bits, but including FCS octets), and had either an FCS or alignment error.

Collisions

The best estimate of the total number of collisions on this Ethernet segment.

64 Byte Frames

The total number of frames (including bad packets) received and transmitted that

were 64 octets in length(excluding framing bits but including FCS octets).

65-127 Byte

Frames

128-255 Byte

Frames

256-511 Byte

Frames

512-1023 Byte

Frames

1024-1518 Byte

Frames

1519-1536 Byte

Frames

The total number of frames (including bad packets) received and transmitted where

the number of octets fall within the specified range (excluding framing bits but

including FCS octets).

NOTE: Statistics are refreshed every 10 seconds by default (See “4.4.2 Configuring the Serial Port”).

Advertising