2 configuring ip trap managers – Planet Technology WGS3-404 User Manual
Page 158
Advertising
WGS3 Layer 3 Switch User’s Manual
- 150 -
5.6.2.2 Configuring IP Trap Managers
The following figure and table describe how to specify management stations that will receive
authentication failure messages or other trap messages from the switch. Up to 5 trap managers may be
entered.
Parameter Description
IP Address
IP address of the trap manager.
Community Name
A community authorized to receive trap messages.
Status
Displays the administrative status of entry. An entry can only be to enabled or
disabled via the console interface.
Advertising