Planet Technology WGS3-404 - Manual (Page 84)

WGS3 Layer 3 Switch User’s Manual - 76 -
4.5.6.2.2 Setting the RIP Advertisement Policy
You can use the following configuration screen to set the timing interval and policies RIP uses to
advertise route information.
Parameter Default Description
RIP Update Time 30 seconds The interval at which RIP advertises known route information.
Range: 0-999 seconds, where 0 disables route advertisements
Default Route
Advertisement
Disabled Enables or disables advertising this switch as a default router.
Static Route
Advertisement
Disabled Enables or disables advertisement of static routes.
Ignore Host Route Disabled If enabled, the switch will not import a default route from other routers.