Planet Technology WGS3-404 - Manual (Page 179)

WGS3 Layer 3 Switch User’s Manual - 171 -
5.7.3.2 VLAN Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing VLAN.
The VLAN Table Configuration of WGS3-2620 and WGS3-404 are slightly different. For WGS3-2620,
the VLAN Table Configuration is as the following:
Parameter Description
VLAN The ID for the VLAN currently displayed.
Range: 1-4094
(Port) Port entries may be marked as:
N : (Normal) Uses GVRP to determine port membership.
S : (Static) Adds port as a static entry. GVRP protocol is disabled.
R : (Registration Fixed) Adds port as a static entry. GVRP protocol
messages are still forwarded through this port.
X : (Forbidden) Disables GVRP for this VLAN on the specified port.
If a removed port is no longer assigned to any other group as an untagged port, it will
automatically be assigned to VLAN group 1 as untagged.
Note: To add a new VLAN, enter a new VLAN number in the VID field, select the port members, and
press Add/Save. To modify a VLAN, click on the edit icon ( ) for the required entry, modify the port
settings, and press Add/Save. To delete a VLAN, click on the edit icon ( ) for the required entry then
press Delete.