9 resetting the system – Planet Technology WGS3-404 User Manual
Page 235
Advertising
WGS3 Layer 3 Switch User’s Manual
- 227 -
5.9 Resetting the System
Use the Restart command under the Main Menu to reset the management agent. The reset screen is
shown below.
Parameter Description
Reload Factory
Defaults
Reloads the factory defaults
[Apply]
Restarts the switch.
NOTE: When restarting the system, it will always run the Power-On Self-Test. It will also retain all
system information, unless you elect to reload the factory defaults.
Advertising