PowerFile Active Archive Appliance A3 - Manual (Page 19)

Installing the Archive Engine 11
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
To attach the inner rails:
1. Attach
C
to the left and right side of the chassis using screws
E
with the Allen wrench. Repeat
this step on the other side of the chassis.
The inner rail is attached by four screws on each side. Note their relative positions in the
diagram.
Archive Engine (Generation 1)
2. Attach
F
to the left and right slides using screws
G
. Ensure the latch
F
is oriented with its
spring arm located against its stop. (At top on right-hand side and at bottom on left-hand side).
Repeat this step on the other side of the chassis.
E
G
F
C
L
Latch stop