PowerFile Active Archive Appliance A3 - Manual (Page 40)

32 Installing the Media Library in a Front-mount Configuration
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
3. On the left outer rail, locate the rail latch. Push down on the rail latch.
Media Library Rail Latch
Refer to the following illustration for a close up of the rail latch.
Media Library Rail Latch (Close Up)
4. Locate the rail latch on the right outer rail. Pull up on the rail latch.
5. Slide the Media Library rails into the rack rails, keeping the pressure even on both sides.
6. Push the Media Library until it is fully inserted into the rack and it locks into place. The Media
Library should glide smoothly on the rails.