PowerFile Active Archive Appliance A3 - Manual (Page 27)

Installing the Archive Engine 19
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Attaching the Extension Brackets
If you have an extended depth rack, extension brackets can be added to the end of the rails to
increase the length of the outer rails by 6 inches up to 40 inches.
To attach the extension brackets to the rack:
1. Assemble the outer rail by attaching the short section of the outer rail to the outside of the long
section of the outer rail. You must align the pins with the slides. Ensure that the bracket ends face
the same direction.
2. Attach the extension bracket to the short section of the outer rail with two of the M5x10 screws.
The extension bracket has threaded holes, so no nuts are needed. Ensure that the bracket ends
face the same direction.
Archive Engine (Generation 2) Extension Bracket
3. Adjust the rail to the proper length so the rail fits securely into the rack.
4. Secure the long bracket side of the rail to the front side of the rack with two of the M5x16 screws
and the provided washers.
Secure to
Front of Rack Attach Outer
Rails Together Secure to
Rear of Rack