PowerFile Active Archive Appliance A3 - Manual (Page 41)

Installing the Media Library in a Front-mount Configuration 33
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Media Library in Front-mount Configuration
Attaching the Media Library Feet
Some Media Library models are shipped with the feet already attached. Follow the steps below
if your library does not have the feet attached and you wish to place the Media Library unit on a
flat surface instead of installing it on a rack.
Your PowerFile Library Accessory Kit contains four (4) feet that can be attached to the bottom
of the Media Library.
To attach the feet:
1. Detach the Media Library power cord from the power source.
2. Make sure there are absolutely no discs in the Media Library.
3. Place the Media Library upside down on a soft, flat surface that is smooth and clean.
4. Align the positioning nibs on each foot with the alignment holes in the Media Library base.