PowerFile Active Archive Appliance A3 - Manual (Page 45)

Installing the Media Library in a Back-to-Back Configuration 37
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Back-to-Back Configuration
Getting Started
To get started:
1. Before beginning the rack installation procedure, decide which Media Libraries will be installed
front-facing in the rack, and which ones will be installed rear-facing in the rack.
Note: Be sure to take into consideration the installation of a 2RU Archive Engine in the middle of the
rack, between two or more Media Libraries.
2. Remove all the components from the Media Library kit.
You will see a small, light gray latch on the inner surface of one rail.
3. Slide the gray latch until the two parts of the rail can be detached.
4. Separate the inner and outer rails.
The rails must be separated before they can be attached to the Media Library.