PowerFile Active Archive Appliance A3 - Manual (Page 52)

44 Installing the Media Library in a Back-to-Back Configuration
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Installing the Outer Rails on the Front-mounted Chassis
The outer rails attach to the server rack and hold the server in place. The outer rails for the Media
Library extend between 30 inches and 42 inches. No tools are required to attach the outer rails.
To attach the outer rails:
1. On the rack's rear vertical post, identify the RMU location where you want to attach the right
outer rail. The right outer rail should be installed at the same level as the right inner slide rail on
the chassis.
Media Library Inner Slide Rail and Outer Rail on Front-mount Configuration
2. Adjust the rail to the proper distance so that it fits between the front and rear rack posts.
3. At the rear of the rack, position the rail so that one of the white mounting-bracket flanges rests
against the inside of the rack post.
Refer to the following illustration for the location of the white mounting-bracket flanges on the
outer rail. There is one mounting-bracket flange on each end of the outer rail.
Inner Slide Rail
Outer Rail
Front-mounted
Chassis