PowerFile Active Archive Appliance A3 - Manual (Page 67)

Setting Up the A3 System 59
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Archive Engine and Media Library Connections
• If more than one Media Library is installed at your site, it is recommended that you
distribute the Media Libraries among the FireWire cards. For example, given four libraries,
plug one library into each card before you start doubling up.
• If using a back-to-back configuration, connect all front-facing Media Libraries to the front-
facing Archive Engine. Similarly, connect all rear-facing Media Libraries to the rear-facing
Archive Engine.
•
Daisy chaining of Media Libraries is not supported.
3. Use the provided power cords to connect the Archive Engine to a UPS or properly grounded
electrical outlet.
4. Connect the Media Libraries to a Universal Power Supply (UPS) or properly grounded electrical
outlet.
WARNING: DO NOT use a UPS with automatic shutdown or so called smart features. The PowerFile
system does not support these features. Use a simple UPS to protect your system from power blackouts
and brownouts.
A
b