PowerFile Active Archive Appliance A3 - Manual (Page 26)

18 Installing the Archive Engine
Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide
Attaching the Outer Rails
The outer rails attach to the server rack and hold the server in place. The outer rails for the
Archive Engine extend between 32 inches and 34 inches (or up to 40 inches with the extension).
To attach the outer rails:
1. Assemble the outer rail by attaching the short section of the rail to the outside of the long section
of the rail. You must align the pins with the slides. Also, both bracket ends must face the same
direction.
2. Adjust both the short and long brackets to the proper distance so that the rail fits snugly into the
rack.
3. Secure the long bracket side of the rail to the front side of the rack with two of the M5x16 screws
and the provided washers.
4. Secure the short bracket side of the rail to the rear side of the rack with two of the M5x16 screws
and the provided washers.
5. Repeat steps for the other outer rail.
Archive Engine (Generation 2) Outer Rail Assembly Detail
Secure to Front of Rack Attach Outer
Rails Together Secure to Rear of Rack