NEC MA4000 - Manual (Page 29)

Cable Management Tools 2-11
MA4000 Expense Management Cable Management User Guide - Issue 1
General Settings
Cable Management's General Settings capability is located on the
Cable Management Main Page via the General Settings link under the
SETUP section of the menu.
When the General Settings link is selected, the Hide Sections pop-up
window appears. This tool is meant for hiding specific areas of the
infrastructure that are not in use. Within the pop-up window, the user
can select the areas to hide by selecting the box and then pressing the
SAVE button to close the pop-up window. These areas will be hidden
throughout the application and can be reinstated for future use by
following the same process.
The areas that can currently be hidden are listed as follows:
• Pathways
• Firestops
• Grounding
• Splices
The four areas listed above are very important areas of your infrastructure. Using
Cable Management to document these areas is recommended, but hiding these
areas and not using them is up to the user's discretion. Most importantly, these
sections can be hidden and reinstated at any time depending on user preference. NOTE