NEC MA4000 - Manual (Page 50)

4-16 Setting Up Infrastructures
MA4000 Expense Management Cable Management User Guide - Issue 1
Step 6 To delete any Horizontal Link type, click on the type, click the Delete
button, and then click Save before exiting the window.
Connecting Contacts to a Horizontal Link
Only the basic information in the Horizontal Link Type Frame is required
for you to continue setting up a Horizontal Link. You may, however,
select users associated with this link.
Step 1 Click the yellow ellipsis button next to the Contact field.
Step 2 The Select Contact window pops up with all users associated with the
space for the selected Horizontal Space. To find the correct user easily,
you can sort any column by clicking in the column heading. A user can
also select Set Location to connect to a contact not presently located in
the same space or to locate a user.
Step 3 Select the user and click OK.
Connecting Workstation Assets to a Horizontal Link
Step 1 In the Connected Asset group box, click the yellow ellipsis button next
to the Name field.
Step 2 The Attach Asset window appears. Only other workstation assets
appear in this window and are available for connection.
Step 3 To find the correct asset easily, you can sort any column by clicking in the
column heading.
Step 4 Select the asset and click Connect. The grayed Number and Type fields
are populated.
Connecting a Data Horizontal Link to a Backbone Asset
Step 1 In the Backbone Connection group box, click the yellow ellipsis button
next to the Asset ID field.
Step 2 The Attach Asset window appears with the available backbone assets
listed. To find the correct asset easily, you can sort any column by
clicking in the column heading. Select the asset to which you wish to
attach, and click Connect.
Step 3 Click the button next to the Asset Port field.
Step 4 The Port/Pairs window pops up. Select the port the horizontal link will
connect to and click the OK button. The ID address for the backbone
asset will be automatically populated.
Step 5 5. Click Save.