NEC MA4000 - Manual (Page 71)

Appendix - 1
MA4000 Expense Management Cable Management User Guide - Issue 1
Appendix
Product Functionality
Termination Hardware
Termination hardware for all cabling infrastructure is easy to set up.
Cable Management makes it simple to locate termination hardware
when you need to move cabling; it's also easy to track ports/positions
and to see how each is being used. See “Adding Termination Hardware”
on page 4-10 .
Ability to see termination hardware port/position details/status
You can see status and details of termination hardware ports/positions.
The Port/Pos. The Details tab of the Termination Hardware feature lists
the ports/positions, Cable Type, Cable ID, and Backbone Pairs/Strands.
There is also an editable Status column that will automatically show
Available or Used status, and which you can edit to Damaged should a
port/position become damaged.
See
“Termination Hardware” on page 4-10 .
Cross-Connects
Cross-Connects between backbone cables, between horizontal links and
a backbone cable, and between a backbone cable and an asset are now
easy input and tracked. See “Horizontal Links” on page 4-14 , and “Adding a
Backbone” on page 4-20 .
Firestops
You can keep track of the location and type of every firestop in your
infrastructure. When new cabling entrances through firewalls are
created, the associated new firestop can be recorded. In addition,
firestops can be connected to pathways via the Pathways tab.
See
“Adding a Firestop” on page 4-25 and “Adding a Pathway” on
page 4-26 .