NCR S26 - Manual (Page 100)

Using the EISA Configuration Utility
5-10 Using the System Utilities
Configuring Your Computer Initially
To configure your computer for the first time, follow these steps:
1. Select “Configure computer” from the main menu. See the previous
heading, “Accessing the ECU” on how to access the main menu. The
“Steps in configuring your computer” screen displays.
2. Select “Step 1: Important EISA configuration information” from the menu
to display the screen, as shown in the figure below.
Figure 5-4. Important EISA Configuration Information
Step 1: Important EISA configuration information
Your new EISA computer requires
a new approach to configuration.
Please take just a few minutes to
read all of the screens in this step
(Step 1) for more information.
You may return to these screens
at any time by pressing F1 and
selecting 'EISA configuration'
from the help menu.
Press ENTER to continue.
Next = ENTER <Previous = F9> <Done = F10>
Welcome
to
EISA
3. Read through the information and press Esc when finished.