Power on password, Remote diagnostic configuration – NCR S26 User Manual
Page 84
Advertising
System Security
4-28
Using the BIOS Setup Utility
Power On Password
The power-on password secures your system against unauthorized use. Once
you set this password, you have to type it whenever you boot the system. To
set this password, follow the same procedure as setting a Setup password.
Remote Diagnostic Configuration
The remote diagnostic configuration allows the RDM notification procedure to
be set. This is described fully in the NCR ValuePlus CD for BackOffice,
Release 4.2, User’s Guide that is included with the system.
Advertising